Dallas reader ESIM264/364 ELDES
- Simple, low-cost metal stampings form a read/write probe for the iButton family
- Probe guides the entry of the iButton
- iButton slides over the surface to self-clean contacts
- Accessible shallow probe cavity simplifies removal of debris such as mud
- Flexible design supports panel-mount or hand-grip mount with optional tactile feedback
- Bright tarnish-resistant metal surface provides millions of operations
- Panel-mount probe, prewired for easy installation
- Hand-grip probe mates to RJ-11 jack for quick installation
ELDES Wireless signal repeater EWR2
- Wireless device EWR2 expands the wireless signal range between Eldes alarm systems ESIM364, EPIR3 and wireless devices. EWR2 comes with LED indicator intended for successful data transmission to the alarm system confirmation
- A set of EWR2 includes two antennas, internal and external that switch automatically
- Repeater is also equipped with the battery fault/wrong placement LED indication and external power connection LED
- It is easy to bind EWR2 by using Eldes Configuration Tool or by sending SMS message to alarm system
- Up to 4 EWR2 devices can be connected to Eldes alarm systems
- Wireless repeater EWR2 supports up to 32 wireleless accessories, such as sirens, smoke detectors, door sensors and other
Wireless key-fob EWK2 (black)
- EWK2 is the simplest way to control the security system
- The keyfob has 4 buttons, which can be configured to arm/disarm the security system, open gates or control different home appliances
- The built-in buzzer and LED light allows to check the status of the system and make sure if command was successfully completed
Wireless key-fob EWK2A
- EWK2A keyfob model features one configurable button
- After the button is pressed, EWK2A internal buzzer’s sound signal and red LED indicator confirms a transferred command to ELDES alarm system via wireless connection
- EWK2A compatible with: ESIM364, PITBULL-ALARM
Wireless key-fob EWK2
- EWK2 keyfob is a wireless device intended to remotely arm and disarm ELDES alarm system, cause system alarm or to control any electric appliance connected to the alarm system’s PGM output
- EWK2 keyfob features sleek design and four configurable buttons intended to operate according to individual needs
- After the button is pressed, EWK2 internal buzzer’s sound signal and red LED indicator confirms a transferred command to ELDES alarm system via wireless connection. Depending on Eldes control panel it is allowed to connect up to 32 keyfobs
ELDES ESIM252
- ESIM252 allows to expand existing security panels and systems with GSM capabilities
- Adds SMS and auto dial alerts, allows remote control. If PGM or Bell is activated, a warning call is dialed and an SMS message is sent to the preset phone numbers
- ESIM252 allows prerecord 10 different voice messages up to 15 sec. length each for different user and situation
- It is possible to remotely control electric equipment by a call too
ELDES Hardwired zone and PGM expansion module EPGM1
- The 16 Zone Expansion Module EPGM1 adds 16 hardwired zones
- 2 Programmable outputs 500mA (PGM) and provides 500mA @ 12VDC auxiliary current
ELDES Programmable output module EPGM8
- Module EPGM8 is used to expand the quantity of outputs in Alarm and Control system ESIM264 to 12 programmable outputs (8 more programmable outputs)
ELDES Keyboard EKB2 (white)
- EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264
ELDES Keyboard EKB3
- Arm and disarm security system
- Arm and disarm STAY mode
- Configure system parameters
- Display information with LED indicators
- Inform about system status via sound signaler
ELDES Keyboard EKB2 (black)
- EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264
Power supply fof PITBULL, white ELDES ESIM 230VAC/15VDC 1A
- Power supply fof PITBULL, white ELDES ESIM 230VAC/15VDC 1A
GSMAlarm-340
- 5 users receive information about the protected object
- 4 programmable inputs/outputs
- GSM JAMMING detection
GSMAlarm-600
- 16 inputs
- Up to 32 protection zones
- 7 programmable low current outputs and one siren output
- 5 users are notified
- GSM JAMMING detection
GSMAlarm-500
- 6 inputs
- Up to 15 protection zones
- 3 programmable low current outputs + 1 high current relay output
- 5 users are notified
- GSM JAMMING detection
ELDES ESIM364
- Wireless 6 Zone Control Panel (expandable to 76) with integrated GSM modem
- 4 PGM output
ELDES Wireless indoor siren EWS3
- Simply shaped EWS3 device has it all: built-in siren speakers and LED indicators operating with ELDES wireless alarm systems to ensure security.
- The device is designed to notify the user by audio and visual signals in the event of alarm as well as in event of system arming/disarming.
- Two tamper switches prevent the enclosure from attempt to open or detach the device.
ELDES Outdoor wireless siren EWS2
- Outdoor wireless siren EWS2 is battery powered siren with integrated wireless module EW1.
- This wireless module EW1 connects to ELDES wireless security systems and managing EWS2 siren to work with the system.
- Users have to bind it to the central device of security system (by sending a corresponding command via SMS message or using software „ELDES Configuration Tool“) and configure input zones and outputs
- Connected devices are recognized as central security system devices and can be controlled via system phone number
- The siren has integrated battery and in case of power supply failure, it starts alarming. When the system is violated, the siren alarms for one minute
- EW1 module also has one unused zone and one unused output. They can be used to connect variuos additional devices such as motion sensors, smoke detectors and etc (see wireless expansion module EW1 manual)
ELDES wireless zone and PGM output expansion module EW2
- EW2 turns any wired device into wireless and connects it with ELDES control panels.
- 4 zone terminals provide wired digital sensor connection for magnetic door contact, motion detector etc.
Dallas reader ESIM264/364 ELDES
- Simple, low-cost metal stampings form a read/write probe for the iButton family
- Probe guides the entry of the iButton
- iButton slides over the surface to self-clean contacts
- Accessible shallow probe cavity simplifies removal of debris such as mud
- Flexible design supports panel-mount or hand-grip mount with optional tactile feedback
- Bright tarnish-resistant metal surface provides millions of operations
- Panel-mount probe, prewired for easy installation
- Hand-grip probe mates to RJ-11 jack for quick installation
ELDES Wireless signal repeater EWR2
- Wireless device EWR2 expands the wireless signal range between Eldes alarm systems ESIM364, EPIR3 and wireless devices. EWR2 comes with LED indicator intended for successful data transmission to the alarm system confirmation
- A set of EWR2 includes two antennas, internal and external that switch automatically
- Repeater is also equipped with the battery fault/wrong placement LED indication and external power connection LED
- It is easy to bind EWR2 by using Eldes Configuration Tool or by sending SMS message to alarm system
- Up to 4 EWR2 devices can be connected to Eldes alarm systems
- Wireless repeater EWR2 supports up to 32 wireleless accessories, such as sirens, smoke detectors, door sensors and other
Wireless key-fob EWK2 (black)
- EWK2 is the simplest way to control the security system
- The keyfob has 4 buttons, which can be configured to arm/disarm the security system, open gates or control different home appliances
- The built-in buzzer and LED light allows to check the status of the system and make sure if command was successfully completed
Wireless key-fob EWK2A
- EWK2A keyfob model features one configurable button
- After the button is pressed, EWK2A internal buzzer’s sound signal and red LED indicator confirms a transferred command to ELDES alarm system via wireless connection
- EWK2A compatible with: ESIM364, PITBULL-ALARM
Wireless key-fob EWK2
- EWK2 keyfob is a wireless device intended to remotely arm and disarm ELDES alarm system, cause system alarm or to control any electric appliance connected to the alarm system’s PGM output
- EWK2 keyfob features sleek design and four configurable buttons intended to operate according to individual needs
- After the button is pressed, EWK2 internal buzzer’s sound signal and red LED indicator confirms a transferred command to ELDES alarm system via wireless connection. Depending on Eldes control panel it is allowed to connect up to 32 keyfobs
ELDES ESIM252
- ESIM252 allows to expand existing security panels and systems with GSM capabilities
- Adds SMS and auto dial alerts, allows remote control. If PGM or Bell is activated, a warning call is dialed and an SMS message is sent to the preset phone numbers
- ESIM252 allows prerecord 10 different voice messages up to 15 sec. length each for different user and situation
- It is possible to remotely control electric equipment by a call too
ELDES Hardwired zone and PGM expansion module EPGM1
- The 16 Zone Expansion Module EPGM1 adds 16 hardwired zones
- 2 Programmable outputs 500mA (PGM) and provides 500mA @ 12VDC auxiliary current
ELDES Programmable output module EPGM8
- Module EPGM8 is used to expand the quantity of outputs in Alarm and Control system ESIM264 to 12 programmable outputs (8 more programmable outputs)
ELDES Keyboard EKB2 (white)
- EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264
ELDES Keyboard EKB3
- Arm and disarm security system
- Arm and disarm STAY mode
- Configure system parameters
- Display information with LED indicators
- Inform about system status via sound signaler
ELDES Keyboard EKB2 (black)
- EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264
Power supply fof PITBULL, white ELDES ESIM 230VAC/15VDC 1A
- Power supply fof PITBULL, white ELDES ESIM 230VAC/15VDC 1A
GSMAlarm-340
- 5 users receive information about the protected object
- 4 programmable inputs/outputs
- GSM JAMMING detection
GSMAlarm-600
- 16 inputs
- Up to 32 protection zones
- 7 programmable low current outputs and one siren output
- 5 users are notified
- GSM JAMMING detection
GSMAlarm-500
- 6 inputs
- Up to 15 protection zones
- 3 programmable low current outputs + 1 high current relay output
- 5 users are notified
- GSM JAMMING detection
ELDES ESIM364
- Wireless 6 Zone Control Panel (expandable to 76) with integrated GSM modem
- 4 PGM output
ELDES Wireless indoor siren EWS3
- Simply shaped EWS3 device has it all: built-in siren speakers and LED indicators operating with ELDES wireless alarm systems to ensure security.
- The device is designed to notify the user by audio and visual signals in the event of alarm as well as in event of system arming/disarming.
- Two tamper switches prevent the enclosure from attempt to open or detach the device.
ELDES Outdoor wireless siren EWS2
- Outdoor wireless siren EWS2 is battery powered siren with integrated wireless module EW1.
- This wireless module EW1 connects to ELDES wireless security systems and managing EWS2 siren to work with the system.
- Users have to bind it to the central device of security system (by sending a corresponding command via SMS message or using software „ELDES Configuration Tool“) and configure input zones and outputs
- Connected devices are recognized as central security system devices and can be controlled via system phone number
- The siren has integrated battery and in case of power supply failure, it starts alarming. When the system is violated, the siren alarms for one minute
- EW1 module also has one unused zone and one unused output. They can be used to connect variuos additional devices such as motion sensors, smoke detectors and etc (see wireless expansion module EW1 manual)
ELDES wireless zone and PGM output expansion module EW2
- EW2 turns any wired device into wireless and connects it with ELDES control panels.
- 4 zone terminals provide wired digital sensor connection for magnetic door contact, motion detector etc.
Dallas reader ESIM264/364 ELDES
- Simple, low-cost metal stampings form a read/write probe for the iButton family
- Probe guides the entry of the iButton
- iButton slides over the surface to self-clean contacts
- Accessible shallow probe cavity simplifies removal of debris such as mud
- Flexible design supports panel-mount or hand-grip mount with optional tactile feedback
- Bright tarnish-resistant metal surface provides millions of operations
- Panel-mount probe, prewired for easy installation
- Hand-grip probe mates to RJ-11 jack for quick installation
ELDES Wireless signal repeater EWR2
- Wireless device EWR2 expands the wireless signal range between Eldes alarm systems ESIM364, EPIR3 and wireless devices. EWR2 comes with LED indicator intended for successful data transmission to the alarm system confirmation
- A set of EWR2 includes two antennas, internal and external that switch automatically
- Repeater is also equipped with the battery fault/wrong placement LED indication and external power connection LED
- It is easy to bind EWR2 by using Eldes Configuration Tool or by sending SMS message to alarm system
- Up to 4 EWR2 devices can be connected to Eldes alarm systems
- Wireless repeater EWR2 supports up to 32 wireleless accessories, such as sirens, smoke detectors, door sensors and other
Wireless key-fob EWK2 (black)
- EWK2 is the simplest way to control the security system
- The keyfob has 4 buttons, which can be configured to arm/disarm the security system, open gates or control different home appliances
- The built-in buzzer and LED light allows to check the status of the system and make sure if command was successfully completed
Wireless key-fob EWK2A
- EWK2A keyfob model features one configurable button
- After the button is pressed, EWK2A internal buzzer’s sound signal and red LED indicator confirms a transferred command to ELDES alarm system via wireless connection
- EWK2A compatible with: ESIM364, PITBULL-ALARM
Wireless key-fob EWK2
- EWK2 keyfob is a wireless device intended to remotely arm and disarm ELDES alarm system, cause system alarm or to control any electric appliance connected to the alarm system’s PGM output
- EWK2 keyfob features sleek design and four configurable buttons intended to operate according to individual needs
- After the button is pressed, EWK2 internal buzzer’s sound signal and red LED indicator confirms a transferred command to ELDES alarm system via wireless connection. Depending on Eldes control panel it is allowed to connect up to 32 keyfobs
ELDES ESIM252
- ESIM252 allows to expand existing security panels and systems with GSM capabilities
- Adds SMS and auto dial alerts, allows remote control. If PGM or Bell is activated, a warning call is dialed and an SMS message is sent to the preset phone numbers
- ESIM252 allows prerecord 10 different voice messages up to 15 sec. length each for different user and situation
- It is possible to remotely control electric equipment by a call too
ELDES Hardwired zone and PGM expansion module EPGM1
- The 16 Zone Expansion Module EPGM1 adds 16 hardwired zones
- 2 Programmable outputs 500mA (PGM) and provides 500mA @ 12VDC auxiliary current
ELDES Programmable output module EPGM8
- Module EPGM8 is used to expand the quantity of outputs in Alarm and Control system ESIM264 to 12 programmable outputs (8 more programmable outputs)
ELDES Keyboard EKB2 (white)
- EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264
ELDES Keyboard EKB3
- Arm and disarm security system
- Arm and disarm STAY mode
- Configure system parameters
- Display information with LED indicators
- Inform about system status via sound signaler
ELDES Keyboard EKB2 (black)
- EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264
Power supply fof PITBULL, white ELDES ESIM 230VAC/15VDC 1A
- Power supply fof PITBULL, white ELDES ESIM 230VAC/15VDC 1A
GSMAlarm-340
- 5 users receive information about the protected object
- 4 programmable inputs/outputs
- GSM JAMMING detection
GSMAlarm-600
- 16 inputs
- Up to 32 protection zones
- 7 programmable low current outputs and one siren output
- 5 users are notified
- GSM JAMMING detection
GSMAlarm-500
- 6 inputs
- Up to 15 protection zones
- 3 programmable low current outputs + 1 high current relay output
- 5 users are notified
- GSM JAMMING detection
ELDES ESIM364
- Wireless 6 Zone Control Panel (expandable to 76) with integrated GSM modem
- 4 PGM output
ELDES Wireless indoor siren EWS3
- Simply shaped EWS3 device has it all: built-in siren speakers and LED indicators operating with ELDES wireless alarm systems to ensure security.
- The device is designed to notify the user by audio and visual signals in the event of alarm as well as in event of system arming/disarming.
- Two tamper switches prevent the enclosure from attempt to open or detach the device.
ELDES Outdoor wireless siren EWS2
- Outdoor wireless siren EWS2 is battery powered siren with integrated wireless module EW1.
- This wireless module EW1 connects to ELDES wireless security systems and managing EWS2 siren to work with the system.
- Users have to bind it to the central device of security system (by sending a corresponding command via SMS message or using software „ELDES Configuration Tool“) and configure input zones and outputs
- Connected devices are recognized as central security system devices and can be controlled via system phone number
- The siren has integrated battery and in case of power supply failure, it starts alarming. When the system is violated, the siren alarms for one minute
- EW1 module also has one unused zone and one unused output. They can be used to connect variuos additional devices such as motion sensors, smoke detectors and etc (see wireless expansion module EW1 manual)
ELDES wireless zone and PGM output expansion module EW2
- EW2 turns any wired device into wireless and connects it with ELDES control panels.
- 4 zone terminals provide wired digital sensor connection for magnetic door contact, motion detector etc.
12,92 €
Dallas reader ESIM264/364 ELDES
SKU: RGVDS9092- Simple, low-cost metal stampings form a read/write probe for the iButton family
- Probe guides the entry of the iButton
- iButton slides over the surface to self-clean contacts
- Accessible shallow probe cavity simplifies removal of debris such as mud
- Flexible design supports panel-mount or hand-grip mount with optional tactile feedback
- Bright tarnish-resistant metal surface provides millions of operations
- Panel-mount probe, prewired for easy installation
- Hand-grip probe mates to RJ-11 jack for quick installation
93,21 €
ELDES Wireless signal repeater EWR2
SKU: RGSMEWR2- Wireless device EWR2 expands the wireless signal range between Eldes alarm systems ESIM364, EPIR3 and wireless devices. EWR2 comes with LED indicator intended for successful data transmission to the alarm system confirmation
- A set of EWR2 includes two antennas, internal and external that switch automatically
- Repeater is also equipped with the battery fault/wrong placement LED indication and external power connection LED
- It is easy to bind EWR2 by using Eldes Configuration Tool or by sending SMS message to alarm system
- Up to 4 EWR2 devices can be connected to Eldes alarm systems
- Wireless repeater EWR2 supports up to 32 wireleless accessories, such as sirens, smoke detectors, door sensors and other
35,65 €
Wireless key-fob EWK2 (black)
SKU: RVELDESEWK2B- EWK2 is the simplest way to control the security system
- The keyfob has 4 buttons, which can be configured to arm/disarm the security system, open gates or control different home appliances
- The built-in buzzer and LED light allows to check the status of the system and make sure if command was successfully completed
35,65 €
Wireless key-fob EWK2A
SKU: RVELDESEWK2A- EWK2A keyfob model features one configurable button
- After the button is pressed, EWK2A internal buzzer’s sound signal and red LED indicator confirms a transferred command to ELDES alarm system via wireless connection
- EWK2A compatible with: ESIM364, PITBULL-ALARM
35,65 €
Wireless key-fob EWK2
SKU: RVELDESEWK2- EWK2 keyfob is a wireless device intended to remotely arm and disarm ELDES alarm system, cause system alarm or to control any electric appliance connected to the alarm system’s PGM output
- EWK2 keyfob features sleek design and four configurable buttons intended to operate according to individual needs
- After the button is pressed, EWK2 internal buzzer’s sound signal and red LED indicator confirms a transferred command to ELDES alarm system via wireless connection. Depending on Eldes control panel it is allowed to connect up to 32 keyfobs
112,99 €
ELDES ESIM252
SKU: RGSMESIM252- ESIM252 allows to expand existing security panels and systems with GSM capabilities
- Adds SMS and auto dial alerts, allows remote control. If PGM or Bell is activated, a warning call is dialed and an SMS message is sent to the preset phone numbers
- ESIM252 allows prerecord 10 different voice messages up to 15 sec. length each for different user and situation
- It is possible to remotely control electric equipment by a call too
52,32 €
ELDES Hardwired zone and PGM expansion module EPGM1
SKU: RGSMEPGM1- The 16 Zone Expansion Module EPGM1 adds 16 hardwired zones
- 2 Programmable outputs 500mA (PGM) and provides 500mA @ 12VDC auxiliary current
31,64 €
ELDES Programmable output module EPGM8
SKU: RGSMPGM8- Module EPGM8 is used to expand the quantity of outputs in Alarm and Control system ESIM264 to 12 programmable outputs (8 more programmable outputs)
96,97 €
ELDES Keyboard EKB2 (white)
SKU: CVELDESEKB2B- EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264
47,58 €
ELDES Keyboard EKB3
SKU: CVELDESEKB3- Arm and disarm security system
- Arm and disarm STAY mode
- Configure system parameters
- Display information with LED indicators
- Inform about system status via sound signaler
96,97 €
ELDES Keyboard EKB2 (black)
SKU: CVELDESEKB2- EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264
18,80 €
Power supply fof PITBULL, white ELDES ESIM 230VAC/15VDC 1A
SKU: RGSMMB12015VDC- Power supply fof PITBULL, white ELDES ESIM 230VAC/15VDC 1A
112,99 €
ELDES ESIM320 2G remote gate controller
SKU: RGVESIM320- Frequency: 2G
- Inputs: 3
- Outputs: 2
112,82 €
GSMAlarm-340
SKU: RGSMALARM340- 5 users receive information about the protected object
- 4 programmable inputs/outputs
- GSM JAMMING detection
195,96 €
GSMAlarm-600
SKU: RGSMALARM600- 16 inputs
- Up to 32 protection zones
- 7 programmable low current outputs and one siren output
- 5 users are notified
- GSM JAMMING detection