Universal 2G/3G communicator ELDES ET083
- 2G/3G modem available in 3 different frequencies (EU/US/Multiband)
- Configuration via USB cable, no external power source required
- 3 ways of communication: GSM, GPRS (2G/3G), LAN
- 2 tamper switches: for enclosure opening and device detachment from the wall detection
- 5 phone users
- Connection ways to panel: serial BUS interface, RING/TIP interface, PGMs
- No re-configuration of old panel needed
- Full remote configuration via GPRS or/and LAN;
- Fully customizable SMS notifications
- Remote firmware over-the-air (FOTA) update
Aprašymas
| Phone users | up to 5 (system reports to 10 users by SMS/Call) |
| ARC communication methods | Up to 6 |
| Backup communication methods to ARC | Up to 5 |
| Alarm panel wiring | PSTN (RING/TIP terminals) |
| KeyBus or Serial data interface | KeyBus or Serial data interface |
| Supply voltage | 10-24V 300mA max |
| Peak current | Up to 700mA |
| Current used in idle state | Up to 120mA |
| 2G/3G modem frequency | EU-band model: 2G 900/1800MHz, 3G 900/2100MHz bands |
| US-band model: 2G 850/1900MHz, 3G 850/1900MHz | |
| Multi-band model: 2G 850/900/1800/1900MHz, 3G 800/850/900/1900/2100MHz | |
| Number of “low” level (negative) digital inputs | 3 |
| Allowable input values voltage | 0… 1.45V; current: 0.8… 0.6mA |
| Number of outputs | 3 |
| Maximum commuting output values | 3 x 30V; 50mA |
| Generated phone line values | Voltage: 48V; current: 25mA; impedance: 270Ω |
| Dial tone frequency of generated phone line | 425 Hz |
| Dimensions | 129x86x18mm (5.08×3.39×0.71in) |
| Operating temperature range | -20…+55 °C (-4… +131°F) |
| Humidity | 0-90% RH @ 0… +40°C (0-90% RH @ +32… +104°F) (non-condensing |
