PIR Detector PATROL 701

> SKU: JGP701
  • PASSIVE INFRARED DETECTOR

8,18 

Liko tik 1

Palyginti

Aprašymas


PATROL-701 incorporates an efficient detection system, maximum protection from 
false alarms and a modern, elegant design.

PATROL-701 is an ideal infrared human motion detector, evenly covering every point 
of the detection area.  


THE PATROL-701’S ADVANTAGES

  • Automatic selection and counting of incoming pulses in accordance with the strength 
    of input signals.
  • A sensitivity regulator to reliably stabilize the detector’s operation.
  • An optoelectronic switch relay with an unlimited number of operation cycles.
  • Covered area: 18m x 90°.

  • Guaranteed RFI protection. There is no alarm against a 10 watt transmitter within 
    1m at a frequency range of 10MHz to 1000MHz.
  • Hermetical sealing of the pyroelectric sensor protects the detector from draughts 
    and small insects, thus eliminating one of the main causes of false alarms.

  • The detector remains operational at temperatures as low as -30°C.

Diagram_701_901

                    THE PATROL-701 ENABLES THE BEST PROTECTION AT THE LOWEST COST
THE PATROL-701 IS THE PERFECT DETECTOR TO MEET YOUR HIGHEST EXPECTATIONS AND DEMANDS


TECHNICAL SPECIFICATIONS

Detection speed range:………………………………….0.3 – 3.0m/sec;
Power input:…………………………………………………..8.5 – 16VDC;
Current consumption: 
In stand-by mode:…………………………………………………11.5mA; 
In alarm mode with LED on:……………………………………….10mA;
In alarm mode with LED off:…………………………………………7mA;
Pulse mode:…………………………………………………..automatic/2; 
Alarm period:…………………………………………………………..3sec; 
Coverage range:………………………………………………….18meters; 
Relay output:………………………………………….60V; 120mA; 16Ω;
Warm up period:…………………………………………………….40sec; 
Reset time:………………………………………………………….5±1sec;
Light immunity:…………………………………no less than 10000Lux;                                                         
Opening protection:…………………………………TAMPER SWITCH;
Operating temperature range:…………………………….-30ºC +50ºC; 
Storage temperature range:……………………………….-40ºC +80ºC;
RFI immunity:……30V/m at a frequency range 10MHz – 1000MHz;
EMI immunity:……………………………………………………..50000V;
Dimensions:……………………………………93mm x 66mm x 46mm; 
Weight:…………………………………………………………………..94gr.

PATROL-601 is a combination of 2 detectors in one.

PATROL-601 incorporates two cutting edge intrusion detection technologies 
by PIR detector and glass break detector.

PATROL-601 has two microphones for the frequency separation of sound 
signals: Shock /Glass breakag

PATROL-601 ADVANTAGES
  

  • QUAD PIR SENSOR

The PATROL-601, equipped with QUAD PIR sensor, eliminates undetectable zones and ensures the best detection of the infrared energy radiating from the moving intruder in an alarm protected area.

  • EXCEPTIONAL DIRECT AND REFLECTED LIGHT PROTECTION

The PATROL-601 is equipped with the original Fresnel lens made of „POLY IR“, which enables the best penetration of infrared energy and exclusion of false alarms resulting from exposure to direct or reflected sunlight or car headlights.

  • TWO MICROPHONES FOR FREQUENCY SEPARATION OF ACOUSTIC SIGNALS:
    SHOCK / GLASS BREAKAGE

The usage of two microphones in the PATROL-601 allows to separate high-frequency and low-frequency 
components of the acoustic signal, thus significantly to increase the selective sensitivity of the acoustic 
detector, to enlarge the detection range and to detect the real glass breakage only.

  • TWO TEST MODES: GLASS TEST AND SHOCK & GLASS TEST

 There are 2 test modes for the glass break detector testing:

  • Test and adjustment of the high frequency channel – „GLASS TEST“.
  • Complete test of the glass break detector – „SHOCK & GLASS TEST“.
  • TWO SENSITIVITY REGULATORS

 The PATROL-601 sensitivity regulators adjust the PIR detector and the glass break detector sensitivity 
according to the certain surround conditions, thus increasing the PATROL-601 resistance to all kinds 
of environmental disturbances.

  • TWO OPTOELECTRONIC RELAYS

 Two independent optoelectronic relays of the PIR detector and the glass break detector allow 
connecting the PATROL-601 to two independent zones in the control panel.

  • DOUBLE RFI / EMI PROTECTION

The reliable electronic circuit protection by RF and EM filters.

  • MECHANICAL PROTECTION OF PYROELECTRIC SENSOR

The PIR sensor of the PATROL-601 is protected from RF interference by nickel stay. 

  • BIPOLAR PULSE COUNTER

The algorithm, based on bipolar pulse counting, allows the detector to be adapted to various objects with 
complex operational conditions, such as industrial plants, supermarkets, storehouses and hangars.

 

PATROL-601_pic9_2a


THE PATROL-601 – UNPRECEDENTED DOUBLE PROTECTION AND STYLISH 
                     DESIGN – IS A CHOICE OF PROFESSIONALS.
 

TECHNICAL SPECIFICATIONS 

Detection speed range:………………………………….0.2 – 3.0m/sec;
Power input:…………………………………………………..8.5 – 16VDC;
Current consumption: 
In stand-by mode:……………………………………………………20mA; 
In alarm mode with LED on:……………………………………….21mA;
In alarm mode with LED off:……………………………………….16mA;
Pulse mode:……………………………………………………………..1,2;
Alarm period:…………………………………………………………..3sec; 
PIR detection range:……………………………………………15meters;
Glass break detection range:………………………………15m x 180º;
Installation height:……………………………………….up to 10meters;
Relay output:……………………………………NC; 60V; 120mA; 16Ω;
Warm up period:…………………………………………………….50sec; 
Reset time:………………………………………………………….5±1sec;
Light immunity:…………………………………no less than 10000Lux;                                                         
Opening protection:…………………………………TAMPER SWITCH;
Operating temperature range:…………………………….-30ºC +50ºC; 
Storage temperature range:……………………………….-50ºC +80ºC;
RFI immunity:……30V/m at a frequency range 10MHz – 1000MHz;
EMI immunity:……………………………………………………..50000V;
Dimensions:……………………………………75mm x 66mm x 49mm; 
Weight:………………………………………………………………….106gr.